Parameter Selection for Experimental Investigation of Machining Parameters of Inconel -718 for Turning Operation for Green Machining Using AHP
Article Sidebar
Main Article Content
Abstract
The most important part in experimental investigation is Parameter selection. The parameter plays crucial role in type of investigation or the performance evaluation. There are many methods to select the parameters. In this research we proposed Analytical Hierarchy Process (AHP) to select the parameter for the experimental investigation of machining parameters of Inconel-718 for turning operation. It will include the structural investigation and questionarie. The Sattey scale is used for the pairwise comparison. There are various parameters we are considering for experimental investigations .These are like Cutting Speed , Feed, Depth of cut, Material removal rate (MRR),surface roughness, tool wear, helix angle etc.
Downloads
Article Details
This work is licensed under a Creative Commons Attribution 4.0 International License.
References
Benita Beamon, 1998,” Supply Chain Design and Analysis: Models and methods”, International Journal of Production economics, Vol 55, No. 03, pp 281-294.
Chopra Sunil and Peter Meindl, 2001, “Supply Chain Management:Strategy, Planning, and Operations”, Upper Saddle River, NJ: Prentice-Hall, Inc. Chapter 1
Benita Beamon, Victoria Chen, 2001, “Performance analysis of conjoined supply chains”, International Journal of production Research, Vol 39, No. 14, pp 195-218.
Gunshekharan, Harrison, 2005, “Performance measurement of supply chain management”, Elsevier publication, Computers & Industrial Engineering, pp 43-62
Mentzer, John T.,William DeWitt, James S. Keebler, Soonhong Min, Nancy W. Nix, Carlo D. Smith, and Zach G. Zacharia, 2001, “Defining Supply Chain Management,” Journal of Business Logistics, Vol. 22, No. 2, p. 18).
RajatBhagwat, Milind Kumar Sharma, 2007, “Performance measurement of supply chain management: A balanced scorecard approach”, Elsevier publication, Computers & Industrial Engineering, pp 43-62
F. T. S. Chan, 2003,”Performance Measurement in a Supply Chain”, The international journal of advanced manufacturing technology, pp 534-548
Santos, Sonia Gouveia, J. Borges Gomes, Paulo, 2007,”Measuring performance in supply chain - a framework”, pp 93-115.
Parikshit Charan, Ravi Shankar, RajatK.Baisya, 2007,”Selection of supply chain performance measurement system using AHP Approach”, POMS 18th annual conference
Thomas L. Saaty, 2008, “Decision making with the analytic hierarchy process”,International journal of Services Sciences, Vol. 1, No. 1, pp 293-322
Jiaqin Yang, Ping Shi, 2002, “Applying Analytic Hierarchy Process in Firm's Overall Performance Evaluation: A Case Study in China”, international journal of business, pp 45-77
Rachel Mason-Jones, Denis R. Towill, 1999, “Total cycle time compression and the agile supply chain”, International Journal of Production economics, pp 61-73.
Jeffrey W. Herrmann, 2006, “A history of production scheduling, Springer publication”, Handbook of production scheduling,pp59-77
J.K.Sharma, 2007 “Operational Research Theory And Application”,Macmillan Publication Ltd.,Chapter 14 & 22
Bo Terje Kalsaas, 2002 “VSM. An Adequate Method for Lean”, 14th International Conference, Trondheim
Brandon Lee, 2001“Value Stream Mapping in Lean Manufacturing “, IE 780S, Springer, pp78-96
R. Venkata Rao, 2007 “Decision Making in Manufacturing Environment”, Springer Publications
ArunRamnath, P.R. Thyla, A.K.R. Harishsharran ,Materialstoday, “Machining parameter selection in milling epoxy granite composites based on AHP” Volume 42, Part 2, 2021, Pages 319-324
Dr.A.K.Gupta,2007 “Engineering Management”,S.Chand publication